The
Salsnes Filter is pre-engineered, very compact and easy to install
and operate. There
are four models to choose from based on capacity requirements. The filters
are made of high
quality materials that
are designed for long
service life.
The filter structures
are made from 304 stainless steel while the wire cloth
is made from Kevlar-coated polyurethane
(other materials
are
available).
4
MODELS
The Salsnes Filter
screens have the following capacities (based on a nominal
300 micron screen):
|
Salsnes
Filter Capacities & Dimensions (2) |
Data |
Model # |
| |
SF 1000
(1)
|
SF 2000
|
SF
4000
|
SF
6000
|
| Capacity
(wastewater, 250 mg/L) |
10-15
L/sec (160-240 usgpm) |
20-40
L/sec (320-640 usgpm) |
50-80
L/sec (800-1270 usgpm) |
100-140
L/sec (1590-2220 usgpm) |
| Separation
Efficiency (SS) |
40-70%
(80-190 gr/P/dg) |
| Dry Substance
(DS) |
25-35% |
| Length |
1220mm
(48) |
1800mm
(71) |
2300mm
(91) |
2580mm
(102) |
| Width |
1050mm
(42) |
1350mm
(54) |
2150mm
(85) |
2720mm
(107) |
| Height |
1290mm
(51) |
950mm
(38) |
1300mm
(52) |
1630mm
(65) |
| Weight |
380kg
(840 lb) |
475kg
(1050 lb) |
575kg
(1268 lb) |
725kg
(1598 lb) |
(1)
Model SF1000 has an integral air blower within the filter
enclosure.
(2) Capacities
shown are based on municipal sewage using a 300 micron screen.
The capacity is significantly higher
on diluted
wastewater.
|

BENEFITS
The
following benefits can be achieved using a Salsnes Filter:
Reduced Costs
The capital and
operating cost is substantially less than traditional pre-treatment
and primary sedimentation. There are also substantial
cost savings associated with a drastically
reduced footprint.
Proven, Reliable, Pre-Engineered Systems
All systems are pre-engineered and may be available in stock. Upon
order of a new system it is possible to select the orientation of nozzles,
etc to best fit
into the facility.
Several communities in North America are proceeding with the installation
of Salsnes filters.
Small Footprint
One of the most obvious benefits to this new technology is the drastic
improvement in footprint. A single compact Salsnes Filter (app. 100 x 100)
can process up to 160 L/sec (13,800m3/d) at 250mg/L TSS
using a 250 micron wire cloth. The other advantage
of a very small footprint is the ability to retrofit an
existing facility and significantly improve performance without major
changes
to the existing
infrastructure.
Modularity
The use of modular filters allows a municipality to increase capacity as
required by adding more filters as the population demand requires. For
redundancy,
a 100% spare unit can be installed that will act as a backup and will
also serve to
handle peak loads.
Lease & Warranty - No Risk
Aqua-Pure has several filters available for leasing. A trailer-mounted lease
unit can be installed and the results evaluated. If the filter meets (and
likely exceeds) expectations, it can be purchased or another filter can be
ordered.
If the system does not meet expectations it can be returned with no risk
to the customer.
Aqua-Pure stands
by all Salsnes equipment and provides a standard 1 year warranty.
We have service personnel available to trouble-shoot and offer advice.
In
addition, Aqua-Pure has an extensive list of references in North
America from municipalities (and engineering consultants) that have
installed and tested the
Salsnes Filter.
Superior Performance
The Salsnes Filter provides the most cost effective mechanical separation
in the market. The filter is very effective at cleaning the wire cloth
while maintaining
a high capacity. The sludge produced is very dry and the compact
unit provides a very high reduction in suspended solids.
Reduced Odour
Effluent and sludge are removed prior to anaerobic digestion resulting in a dramatic
reduction in odour generation compared to traditional sewage treatment processes.
Increased
Secondary Treatment Capacity
Salsnes Filters remove a large portion of the suspended solids from sewage.
This results in a significant decrease in the BOD and TSS of the sewage
going to secondary treatment. Therefore a smaller secondary treatment system
is
required or the capacity of an existing system can be increased.
Reduced
Sludge Production
By removing a large portion of the solids entering a secondary treatment
system, Salsnes Filters are able to significantly reduce the amount of
waste activated sludge produced. In some cases, WAS production has been
reduced
by over 80%. This results in large reductions in WAS handling expenses.
|